JA-180W Wireless PIR and MW combined detector

0 reviews Write a review

Qty

Power supply	Lithium battery type CR14500 (AA) 3.6 V/2.45 Ah Please note: Battery is not included
Nominal current	21 ï¿½A
Maximal current	38 ï¿½A
Battery low voltage	? 2.6 V
Typical battery lifetime	approx. 2 years (DIP no. 3 to NORM)
Communication band	868.1 MHz, Jablotron protocol
Communication range	approx. 300 m (open area)
Recommended installation height	2.0 to 2.5 m above floor level
PIR detection angle/detection range	110ï¿½/12 m (with basic lens)
MW detection angle/detection range	24ï¿½/15 m (open area)
MW detection angle/detection range	90ï¿½/15 m (sample room)
MW detection range/frequency	9.35 GHz
Dimensions	110 x 60 x 51 mm
Weight	114 g
Classification	Security grade 2/Environmental class II
- according to	EN 50131-1, EN 50131-2-4, EN 50131-5-3
- operational environment	Iindoor general
- operational temperature range	-10 ï¿½C to +40 ï¿½C
- average humidity	75 % RH non condensing
- certification body	Trezor Test s,r.o. (no. 3025)
Complies with	ETSI EN 300 220, ETSI EN 300 440, EN 50130-4, EN 55022, EN 60950-1
Can be operated according to	ERC REC 70-03

Overview

The detector is used for human motion detection in the interior of a building. Available through Pacific GSM for New Zealand Jablotron 100+ projects.

Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.

When motion is sensed by the PIR detector, the MW detector is activated to confirm the triggering of the PIR .
Only after receiving a confirmed alarm signal from the MW unit , the detector sends an alarm report to the control panel.
The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALLWAY, JS 7906 PET or JS-7901 CURTAIN.
It is addressable and occupies one position in the alarm.

Suited to Jablotron 100+ installations needing a wireless pir and mw combined detector (Detectors, Combined and dual).

It is addressable and occupies one position in the alarm.