GSM DIN 2B S Controller

End of Production, here only description and manual

GSM communicator DIN2 is a universal GSM device transmitting information via the GSM network. Makes it easy to control appliances from your mobile phone.
DIN2 GSM is equipped with two universal inputs, which can connect any contact sensors. After changing the status of the input GSM DIN2 will be sending an TXT with the name of entry (eg, burglary, Fire, outage water, etc.) and can optionally be made calls to three phone numbers. Each input is separately configurable.

GSM DIN2 is equipped by two high power relay 230V/5A. You can then remotely via TXT or simply by ringing (free) to change their status.

The development of equipment was the emphasis on simplicity of the basic settings (go the layman), user friendliness (device communicates with you easy to use TXT messages).

Summary of functions and the basic characteristics:

Internal Li-ion battery ensures the operation of the communicator and the relay switch if the failure of the mains voltage 230V

Monitoring mains voltage 230V – warning TXT messages are sent during the outage.

2 inputs for sensor or control panel connection with option to configure for GND connection, GND disconnection or changes in status. Option to use one input as a control input for activation/deactivation from peripheral devices.

The first input has the possibility of setting exit and entry time of approximately 10-90 seconds.

Second input can be switched into the A / D input (activation / deactivation) for keyboard, RFID, remote control receiver. Facility serves as a small security logger with activation / deactivation of the access system.

Each input can be named separately.

Allocation of three telephone numbers per each input for TXT or call alerts

Each input can be separately switched to 24. Loop, to be permanently active inputs (in the watch condition).

Two relays 230V/5A with multiple configuration options. Activation via TXT, call or triggering of inputs (with timer option). Custom naming facility control commands (e.g. ON HEATING, OFF HEATING ...)

GSM DIN2 a series of control mechanisms that contribute to high reliability. Status reporting of critical system parameters on demand or on pre set time and date

GSM DIN2 can be quickly and easily configured using a PC program and a USB adapter! The program lets you make all settings easily storing and retrieving from the configuration file.

System communicates with you via TXT messages intuitive, all the settings can be done via TXT messages, quickly and easily without having to be at the device and mount it on your computer.

Audio tapping (with volume control)

Onboard clock (each TXT has an actual time display)

Possibility to connect a external digital temperature sensor - 50°C to 125°C with thermostat function

Specification:
- Dimensions: 90 x 36 x 58 (hxwxd)
- GSM / GPRS triband module version
- Voltage: 230V AC - communicator is backed up by internal lithium-ion batteries
- Current consumption 35 mA – max consumption 500 mA
- Operating temperature: -20 ° C to +50 ° C
- 2 inputs, activity level GND
- 2 power relays 230 AC/5A

GSM-DIN2B-S-Manual

PC Programmer download

USB_DATA_CABLE_driver

USB Data Cable manual

Voltage	230V AC - communicator is backed up by internal lithium-ion batteries
Current consumption	35 mA – max consumption 500 mA
Communication band	GSM / GPRS 900 / 1800 / 1900 MHz
Inputs	2 inputs, activity level GND
Outputs	2 power relays 230 AC/5A
Operational temperature range	-20 to +50 °C
Dimensions	90 x 36 x 58 (hxwxd)